Laravel Valet is a development environment for macOS minimalists. Laravel Valet configures your Mac to always run Nginx in the background when your machine starts. Then, using DnsMasq, Valet proxies all requests on the *.test domain to point to sites installed on your local machine.
In other words, Valet is a blazing fast Laravel development environment that uses roughly 7 MB of RAM. Valet isn't a complete replacement for Sail or Homestead, but provides a great alternative if you want flexible basics, prefer extreme speed, or are working on a machine with a limited amount of RAM.
Out of the box, Valet support includes, but is not limited to:
However, you may extend Valet with your own .
Installation
Warning
Valet requires macOS and Homebrew. Before installation, you should make sure that no other programs such as Apache or Nginx are binding to your local machine's port 80.
To get started, you first need to ensure that Homebrew is up to date using the
"default": "/Users/Sally/Sites/example-site",
0 command:
Next, you should use Homebrew to install PHP:
After installing PHP, you are ready to install the Composer package manager. In addition, you should make sure the
"default": "/Users/Sally/Sites/example-site",
1 directory is in your system's "PATH". After Composer has been installed, you may install Laravel Valet as a global Composer package:
composer global require laravel/valet
Finally, you may execute Valet's
"default": "/Users/Sally/Sites/example-site",
2 command. This will configure and install Valet and DnsMasq. In addition, the daemons Valet depends on will be configured to launch when your system starts:
Once Valet is installed, try pinging any *.test domain on your terminal using a command such as
"default": "/Users/Sally/Sites/example-site",
4. If Valet is installed correctly you should see this domain responding on
"default": "/Users/Sally/Sites/example-site",
5.
Valet will automatically start its required services each time your machine boots.
PHP Versions
Valet allows you to switch PHP versions using the
"default": "/Users/Sally/Sites/example-site",
6 command. Valet will install the specified PHP version via Homebrew if it is not already installed:
You may also create a
"default": "/Users/Sally/Sites/example-site",
7 file in the root of your project. The
"default": "/Users/Sally/Sites/example-site",
7 file should contain the PHP version the site should use:
Once this file has been created, you may simply execute the
"default": "/Users/Sally/Sites/example-site",
9 command and the command will determine the site's preferred PHP version by reading the file.
Warning
Valet only serves one PHP version at a time, even if you have multiple PHP versions installed.
Database
If your application needs a database, check out DBngin. DBngin provides a free, all-in-one database management tool that includes MySQL, PostgreSQL, and Redis. After DBngin has been installed, you can connect to your database at
"default": "/Users/Sally/Sites/example-site",
5 using the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
1 username and an empty string for the password.
Resetting Your Installation
If you are having trouble getting your Valet installation to run properly, executing the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
2 command followed by
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
3 will reset your installation and can solve a variety of problems. In rare cases, it may be necessary to "hard reset" Valet by executing
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
4 followed by
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
3.
Upgrading Valet
You may update your Valet installation by executing the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
2 command in your terminal. After upgrading, it is good practice to run the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
3 command so Valet can make additional upgrades to your configuration files if necessary.
Serving Sites
Once Valet is installed, you're ready to start serving your Laravel applications. Valet provides two commands to help you serve your applications:
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
8 and
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
9.
The // Set $_SERVER['key'] to "value" for the laravel.test site... // Set $_SERVER['key'] to "value" for all sites...8 Command
The
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
8 command registers a directory on your machine that contains your applications. Once the directory has been "parked" with Valet, all of the directories within that directory will be accessible in your web browser at
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
2:
That's all there is to it. Now, any application you create within your "parked" directory will automatically be served using the
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
2 convention. So, if your parked directory contains a directory named "laravel", the application within that directory will be accessible at
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
4. In addition, Valet automatically allows you to access the site using wildcard subdomains (
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
5).
The // Set $_SERVER['key'] to "value" for the laravel.test site... // Set $_SERVER['key'] to "value" for all sites...9 Command
The
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
9 command can also be used to serve your Laravel applications. This command is useful if you want to serve a single site in a directory and not the entire directory:
Once an application has been linked to Valet using the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
9 command, you may access the application using its directory name. So, the site that was linked in the example above may be accessed at
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
4. In addition, Valet automatically allows you to access the site using wildcard sub-domains (
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
5).
If you would like to serve the application at a different hostname, you may pass the hostname to the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
9 command. For example, you may run the following command to make an application available at
valet unproxy elasticsearch
2:
Of course, you may also serve applications on subdomains using the
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
9 command:
You may execute the
valet unproxy elasticsearch
4 command to display a list of all of your linked directories:
The
valet unproxy elasticsearch
5 command may be used to destroy the symbolic link for a site:
Securing Sites With TLS
By default, Valet serves sites over HTTP. However, if you would like to serve a site over encrypted TLS using HTTP/2, you may use the
valet unproxy elasticsearch
6 command. For example, if your site is being served by Valet on the
valet unproxy elasticsearch
7 domain, you should run the following command to secure it:
To "unsecure" a site and revert back to serving its traffic over plain HTTP, use the
valet unproxy elasticsearch
8 command. Like the
valet unproxy elasticsearch
6 command, this command accepts the hostname that you wish to unsecure:
Serving A Default Site
Sometimes, you may wish to configure Valet to serve a "default" site instead of a
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
0 when visiting an unknown
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
1 domain. To accomplish this, you may add a
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
2 option to your
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
3 configuration file containing the path to the site that should serve as your default site:
"default": "/Users/Sally/Sites/example-site",
Per-Site PHP Versions
By default, Valet uses your global PHP installation to serve your sites. However, if you need to support multiple PHP versions across various sites, you may use the
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
4 command to specify which PHP version a particular site should use. The
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
4 command configures Valet to use the specified PHP version for the site located in your current working directory:
If your site name does not match the name of the directory that contains it, you may specify the site name using the
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
6 option:
For convenience, you may use the
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
7,
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
8, and
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
9 commands to proxy calls to the appropriate PHP CLI or tool based on the site's configured PHP version:
You may execute the
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
0 command to display a list of all of your isolated sites and their PHP versions:
To revert a site back to Valet's globally installed PHP version, you may invoke the
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
1 command from the site's root directory:
Sharing Sites
Valet even includes a command to share your local sites with the world, providing an easy way to test your site on mobile devices or share it with team members and clients.
Sharing Sites Via Ngrok
To share a site, navigate to the site's directory in your terminal and run Valet's
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
2 command. A publicly accessible URL will be inserted into your clipboard and is ready to paste directly into your browser or share with your team:
To stop sharing your site, you may press
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
3. Sharing your site using Ngrok requires you to create an Ngrok account and setup an authentication token.
Note
You may pass additional Ngrok parameters to the share command, such as
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
4. For more information, consult the ngrok documentation.
Sharing Sites Via Expose
If you have Expose installed, you can share your site by navigating to the site's directory in your terminal and running the
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
5 command. Consult the Expose documentation for information regarding the additional command-line parameters it supports. After sharing the site, Expose will display the sharable URL that you may use on your other devices or amongst team members:
To stop sharing your site, you may press
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
3.
Sharing Sites On Your Local Network
Valet restricts incoming traffic to the internal
"default": "/Users/Sally/Sites/example-site",
5 interface by default so that your development machine isn't exposed to security risks from the Internet.
If you wish to allow other devices on your local network to access the Valet sites on your machine via your machine's IP address (eg:
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
8), you will need to manually edit the appropriate Nginx configuration file for that site to remove the restriction on the
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
9 directive. You should remove the
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
0 prefix on the
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
9 directive for ports 80 and 443.
If you have not run
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
2 on the project, you can open up network access for all non-HTTPS sites by editing the
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
3 file. However, if you're serving the project site over HTTPS (you have run
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
2 for the site) then you should edit the
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
5 file.
Once you have updated your Nginx configuration, run the
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
6 command to apply the configuration changes.
Site Specific Environment Variables
Some applications using other frameworks may depend on server environment variables but do not provide a way for those variables to be configured within your project. Valet allows you to configure site specific environment variables by adding a
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
7 file within the root of your project. This file should return an array of site / environment variable pairs which will be added to the global
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
8 array for each site specified in the array:
// Set $_SERVER['key'] to "value" for the laravel.test site...
// Set $_SERVER['key'] to "value" for all sites...
Proxying Services
Sometimes you may wish to proxy a Valet domain to another service on your local machine. For example, you may occasionally need to run Valet while also running a separate site in Docker; however, Valet and Docker can't both bind to port 80 at the same time.
To solve this, you may use the
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
9 command to generate a proxy. For example, you may proxy all traffic from
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
0 to
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
1:
valet proxy elasticsearch http://127.0.0.1:9200
# Proxy over TLS + HTTP/2...
valet proxy elasticsearch http://127.0.0.1:9200 --secure
You may remove a proxy using the
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
2 command:
valet unproxy elasticsearch
You may use the
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
3 command to list all site configurations that are proxied:
Custom Valet Drivers
You can write your own Valet "driver" to serve PHP applications running on a framework or CMS that is not natively supported by Valet. When you install Valet, a
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
4 directory is created which contains a
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
5 file. This file contains a sample driver implementation to demonstrate how to write a custom driver. Writing a driver only requires you to implement three methods:
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
6,
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
7, and
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
8.
All three methods receive the
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
9,
*.test0, and
*.test1 values as their arguments. The
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
9 is the fully qualified path to the site being served on your machine, such as
*.test3. The
*.test0 is the "host" / "site name" portion of the domain (
*.test5). The
*.test1 is the incoming request URI (
*.test7).
Once you have completed your custom Valet driver, place it in the
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
4 directory using the
*.test9 naming convention. For example, if you are writing a custom valet driver for WordPress, your filename should be
"default": "/Users/Sally/Sites/example-site",
00.
Let's take a look at a sample implementation of each method your custom Valet driver should implement.
The use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
6 Method
The
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
6 method should return
"default": "/Users/Sally/Sites/example-site",
03 if your driver should handle the incoming request. Otherwise, the method should return
"default": "/Users/Sally/Sites/example-site",
04. So, within this method, you should attempt to determine if the given
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
9 contains a project of the type you are trying to serve.
For example, let's imagine we are writing a
"default": "/Users/Sally/Sites/example-site",
06. Our
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
6 method might look something like this:
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
The use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
7 Method
The
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
7 should determine if the incoming request is for a file that is "static", such as an image or a stylesheet. If the file is static, the method should return the fully qualified path to the static file on disk. If the incoming request is not for a static file, the method should return
"default": "/Users/Sally/Sites/example-site",
04:
* Determine if the incoming request is for a static file.
public function isStaticFile($sitePath, $siteName, $uri)
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
Warning
The
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
7 method will only be called if the use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
6 method returns "default": "/Users/Sally/Sites/example-site",
03 for the incoming request and the request URI is not "default": "/Users/Sally/Sites/example-site",
14.
The use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
8 Method
The
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
8 method should return the fully qualified path to your application's "front controller", which is typically an "index.php" file or equivalent:
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
Local Drivers
If you would like to define a custom Valet driver for a single application, create a
"default": "/Users/Sally/Sites/example-site",
17 file in the application's root directory. Your custom driver may extend the base
"default": "/Users/Sally/Sites/example-site",
18 class or extend an existing application specific driver such as the
"default": "/Users/Sally/Sites/example-site",
19:
use Valet\Drivers\LaravelValetDriver;
class LocalValetDriver extends LaravelValetDriver
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public_html/index.php';
Other Valet Commands
CommandDescription
"default": "/Users/Sally/Sites/example-site",
20Display a list of all Valet commands.
"default": "/Users/Sally/Sites/example-site",
21Run this command from a "parked" directory to remove it from the parked directory list.
"default": "/Users/Sally/Sites/example-site",
22View a list of logs which are written by Valet's services.
"default": "/Users/Sally/Sites/example-site",
23View all of your "parked" paths.
* Get the fully resolved path to the application's front controller.
public function frontControllerPath($sitePath, $siteName, $uri)
return $sitePath.'/public/index.php';
6Restart the Valet daemons.
"default": "/Users/Sally/Sites/example-site",
25Start the Valet daemons.
"default": "/Users/Sally/Sites/example-site",
26Stop the Valet daemons.
"default": "/Users/Sally/Sites/example-site",
27Add sudoers files for Brew and Valet to allow Valet commands to be run without prompting for your password.
"default": "/Users/Sally/Sites/example-site",
28Uninstall Valet: shows instructions for manual uninstall. Pass the
"default": "/Users/Sally/Sites/example-site",
29 option to aggressively delete all of Valet's resources.
Valet Directories & Files
You may find the following directory and file information helpful while troubleshooting issues with your Valet environment:
"default": "/Users/Sally/Sites/example-site",
30
Contains all of Valet's configuration. You may wish to maintain a backup of this directory.
"default": "/Users/Sally/Sites/example-site",
31
This directory contains DNSMasq's configuration.
"default": "/Users/Sally/Sites/example-site",
32
This directory contains Valet's drivers. Drivers determine how a particular framework / CMS is served.
"default": "/Users/Sally/Sites/example-site",
33
This directory contains custom Valet extensions / commands.
"default": "/Users/Sally/Sites/example-site",
34
This directory contains all of Valet's Nginx site configurations. These files are rebuilt when running the
"default": "/Users/Sally/Sites/example-site",
2 and
valet unproxy elasticsearch
6 commands.
"default": "/Users/Sally/Sites/example-site",
37
This directory contains all of the symbolic links for your .
* Determine if the driver serves the request.
public function serves($sitePath, $siteName, $uri)
return is_dir($sitePath.'/wp-admin');
3
This file is Valet's master configuration file.
"default": "/Users/Sally/Sites/example-site",
39
This file is the PHP-FPM socket used by Valet's Nginx installation. This will only exist if PHP is running properly.
"default": "/Users/Sally/Sites/example-site",
40
This file is the user log for PHP errors.
"default": "/Users/Sally/Sites/example-site",
41
This file is the user log for Nginx errors.
"default": "/Users/Sally/Sites/example-site",
42
This file is the system log for PHP-FPM errors.
"default": "/Users/Sally/Sites/example-site",
43
This directory contains the Nginx access and error logs.
"default": "/Users/Sally/Sites/example-site",
44
This directory contains the
"default": "/Users/Sally/Sites/example-site",
45 files for various PHP configuration settings.
"default": "/Users/Sally/Sites/example-site",
46
This file is the PHP-FPM pool configuration file.
"default": "/Users/Sally/Sites/example-site",
47
This file is the default Nginx configuration used for building SSL certificates for your sites.
Disk Access
Since macOS 10.14, access to some files and directories is restricted by default. These restrictions include the Desktop, Documents, and Downloads directories. In addition, network volume and removable volume access is restricted. Therefore, Valet recommends your site folders are located outside of these protected locations.
However, if you wish to serve sites from within one of those locations, you will need to give Nginx "Full Disk Access". Otherwise, you may encounter server errors or other unpredictable behavior from Nginx, especially when serving static assets. Typically, macOS will automatically prompt you to grant Nginx full access to these locations. Or, you may do so manually via
"default": "/Users/Sally/Sites/example-site",
48 >
"default": "/Users/Sally/Sites/example-site",
49 >
"default": "/Users/Sally/Sites/example-site",
50 and selecting
"default": "/Users/Sally/Sites/example-site",
51. Next, enable any
"default": "/Users/Sally/Sites/example-site",
52 entries in the main window pane.
MySQL menggunakan model database apa?
MySQL merupakan sistem manajemen database relasional (RDBMS) yang bersifat open source berbasis SQL dan bekerja dengan model client-server.
Manakah cara yang digunakan untuk memeriksa bahwa MySQL server sudah berjalan atau belum?
Untuk memastikan bahwa MySQL Server telah berjalan dan siap digunakan, Anda dapat mencoba menuliskan perintah (command) "select –version();" di baris perintah (prompt) MySQL (mysql>) dan kemudian tekan tombol keyboard Enter untuk mengetahui versi MySQL Server yang terinstal.
Bagaimana cara masuk ke MySQL dengan CMD?
MySQL Membuat Database dan Table.
Buka command prompt dengan cara tekan ctrl + R keudian ketik cmd lalu enter..
Buka MySQL dengan cara mengetikan cd AppServ\MySQL\bin\MySQL..
Bila meminta password, masukkan password yang kalian buat (tapi biasanya password defaultnya “root”).
Apakah MySQL itu gratis?
Sebaliknya, MySQL bersifat open-source dengan lisensi General Public License sehingga bebas untuk digunakan. Anda hanya perlu membayar kalau membutuhkan bantuan teknis saja.
